ADVERTISEMENT
Create this deadly mosquito trap at no cost and you can get rid of this problem. Not only will you save money, but you can rely on a completely natural remedy. Here’s what to do to benefit from all this.
Mosquito trap
With the arrival of the summer, the problem of annoying mosquitoes is recurring. Insects that with their bites cause us various discomforts, with skin redness and strong itching. With this extremely effective trap you can get rid of mosquitoes at no cost, so you can also benefit from an optimal form of savings, thanks to this valid remedy. The details to make it happen.
Deadly mosquito trap at no cost
As we said before, we often find ourselves having to look for a solution, if we talk about mosquitoes and their presence that often becomes annoying. With the method indicated below, you will have the opportunity to create yourself a deadly trap for mosquitoes, without spending anything. So you can save money and at the same time you will have the opportunity to solve this problem.
In addition, this kind of trap will also allow you to eliminate the problem of midges, flies and flies. Are you curious? Then read on, knowing that for the realization of this completely natural method you will need products that, usually, are already in your homes.
How to easily prepare the DIY remedy
At this point, show some attention, as this method involves a series of steps that must be followed to the letter. The first thing to do is to get two plastic bottles, with a minimum capacity of one and a half or two liters.
Afterwards you will need a beer, water, honey and dried yeast or a fresh version.
In addition to these first ingredients, you will have to add others: you will need scotch, aluminum foil, a scissors and a led light, very important for the execution of the trap.
This small light must be switched on and off by means of a mechanism connected to a battery.
The first step to create this particular trap is to take one of the two bottles 30 cm high. At 10 cm, starting from the neck go down and cut, to get so two parts of the bottle.
Now it will be necessary to take the upper part without the cap, and then insert it upside down inside the second part of the bottle.
With the second bottle and starting from the bottom, you will count 10 cm, to cut according to the same method used for the first bottle.
In this way you will get a sort of plastic cup that you will cut starting from the top, going down about 45 cm to make many small cuts, not exceeding 5 centimeters.
The next and final steps of the preparation
Now we will start to make the mixture to be inserted inside the trap, using as a basic element beer or water, depending on what you have in the house. To add 4 tablespoons of processed white sugar to 250 ml of warm water or to beer.
ADVERTISEMENT
