How to Remove Mold from Walls and Get Rid of the Problem Permanently

The reasons that lead to its formation are many: old walls, poor air renewal, excess humidity, defects in insulation work or water infiltration. However, whatever the cause, once it appears, immediately focus on eliminating it. The risk of developing allergic reactions due to  bacteria and spores spread through the air is, in fact, higher than ever. So, the first step could be to eradicate what generated it so that you do not have to deal with it a second time. Once this is done, however, it is necessary to clean the surfaces: let’s see how to remove mould from walls with some effective remedies.

White vinegar is a powerful mold remover

Among the most effective natural solutions for removing mould from the walls of the house is undoubtedly white vinegar: the acid it contains, in fact, manages to sterilise the surfaces on which it is applied and perfectly clean the walls of any trace of dirt. A good way to use it, therefore, is to add a few tablespoons to a spray dispenser filled with plain water: by doing so, it will be easier to spray the solution directly on the wall to be treated. Once this is done, however, it is necessary to let the liquid act for a few minutes before passing a soft cotton or microfibre cloth and continue rubbing until the mould is completely removed. Where the  stains were particularly stubborn, however, it is possible to proceed with white vinegar used in pure form, remembering to keep the windows open so as not to impregnate the room with its strong smell.

Baking soda and lemon to remove mold

Still remaining in the field of natural remedies, an alternative to vinegar can be the combination of baking soda and  lemon  : together, in fact, these ingredients give life to a powerful detergent capable of counteracting even the most persistent fungi. In addition, both have a deep antibacterial and  whitening action  , perfect for removing stains from walls without damaging the plaster.

Its use is very simple: always starting from a spray diffuser, just dissolve two or three tablespoons of baking soda in water and add the juice of one lemon; for an even stronger solution, you can also pour a tablespoon of vinegar; Finally, dropping a few drops of  scented essential oil  will allow you to better resist the intense odor generated, especially if the environment to be treated is small or without windows.

Continued on next page