How to Remove Yellowing, Staining, and Water Marks from Your Toilet

Preparation and method of use

1. Remove the toilet seat: Unscrew the nuts on the bottom of the toilet seat and carefully remove it.
2. Prepare the mixture: In a bowl, place the baking soda, all-purpose powder, 40 volume hydrogen peroxide and toothpaste. Mix well until you obtain a homogeneous paste.
3. Remove water from the toilet: Using latex gloves and a disposable cup, remove as much water as possible from the toilet bowl by pouring the water down the bathroom drain.
4. Apply the mixture: Apply the prepared mixture on the multi-purpose abrasive fiber.
5. Scrub the toilet: Scrub the entire toilet bowl with the abrasive fiber soaked in the mixture, making sure to cover both the inside and outside of the toilet.
6. Let it sit: Let the mixture sit for at least 1 hour for it to take effect.
7. Rinse: Rinse the toilet with plenty of water to remove all residue from the mixture.
8. Reassemble the seat: Once clean, reassemble the toilet seat into place.

Tips:

• Protection: Wear latex gloves throughout the process to protect your hands from chemicals.
• Ventilation: Make sure the bathroom is well ventilated while cleaning to avoid inhaling fumes.
• Regular Cleaning: To keep your toilet clean and stain-free, repeat this process once a month or as needed.
• Natural alternative: If you prefer a more natural option, you can replace the all-purpose vinegar with white vinegar, although it may be less effective for severe stains.

I guarantee you will be impressed with the results of this easy homemade toilet bowl cleaning mix!