ADVERTISEMENT
Several cracks in the walls.
Several cracks in walls – Source: Bob Vila
Depleting Cracking Problems depends on several factors
When you want to proceed with the treatment of cracks, you have to look at the particularities of the latter. And for good reason, depending on whether they are outside or inside, the visible cracks will need different repairs. It is also necessary to take into account the size of these holes but also their depth. These elements affect the filling and restoration needed to smooth the wall.
How do you know if the wall has dangerous cracks?
As explained above, to fill these gaps that may be due to water infiltration, it is necessary to take into account different peculiarities such as size or depth. It is also important to understand the gravity of this hole in the wall because there are different types of cracks. Micro-craps are superficial and measure less than 0.2 millimeters wide. Although they may be harmless, it is important to monitor them if they have appeared recently. The second category includes small cracks in width of 0.2 to 2 millimetres. You need to be careful with the latter because they can be caused by inherent damage to the house. In this case, the intervention of a professional is necessary. The size of the cracks, also called cracks, is greater than 2 millimeters and is symptomatic of a structural problem such as a failure of the construction or foundation. And for good reason, this hole can deteriorate the strength of a roof or wall.
repaint a wall
Repainting a Wall – Source: The Spruce
It is essential to keep an eye on the cracks in the walls.
The cover of a cracked wall should precede the assessment of the danger of the hole. Hiding the latter is not enough because remedying without analyzing the underlying reasons is a time bomb. And for good reason, even the small visible cracks can be the result of a serious cause, even if repaired. When they exceed 0.2 millimeters, they can potentially turn into cracks. In this case it will be necessary to anticipate by requesting advice and repair to a construction professional. And for good reason, these large cracks can cause support to collapse. Sometimes it is the mold that damages them. Fortunately, it is possible to get rid of it with different techniques.
How are cracks evaluated in the ceilings and walls?
During the intervention of a specialist, it begins by analyzing the gravity of the cracks in the ceiling or wall. You will use tools as a plaster support to measure the depth of the hole. You can also analyze the latter with a graduated crack meter to measure the width of this slot. The construction professional can also use a sample cup for the same purpose. It is thanks to these devices that the expert will be able to know if a repair will be necessary.
seal the cracks
Closing the cracks – Source: Homedit
How to fill a plaster wall?
Generally the walls with this material are located inside the houses. Cracks that can damage them are usually shallow. Fortunately, cracking can be stopped with the knowledge of DIY and the right tools. To do this you will need a brush, a scraper, a spatula, sandpaper and a putty cartridge. The first step is to widen the hole with the scraper. . . Then use the brush to clean the plaster residue and sand the sides with the inside of the slot. It’s time to use the putty to fill the guy and wait for him to dry out. Use the sandpaper to smooth the wall or ceiling. For a more aesthetic appearance, it will have to be repainted with white or the color you prefer. Magic, isn't it?
continued on next page
ADVERTISEMENT
