Decracking trouble depends on several factors
When you want to treat cracks, you have to consider their particularities. And for good reason, depending on whether they are outside or inside, the visible cracks will require different repairs. It is also necessary to take into account the size of these holes but also their depth. These elements affect the filling and restoration needed to smooth the wall.
How do you know if the wall has dangerous cracks?
As explained above, to fill these gaps that may be due to water infiltration, it is necessary to take into account some peculiarities such as size or depth. It is also important to understand the gravity of this hole in the wall because there are different types of cracks. Micro-craps are superficial and measure less than 0.2 millimeters wide. Although they may be harmless, it is important to be careful if they have appeared recently. The second category covers small cracks with a width of between 0.2 and 2 millimeters. You have to be careful with these because they can be caused by inherent damage to the house. In this case, the intervention of a professional is necessary. The size of the cracks, also called slots, is greater than 2 millimeters and is symptomatic of a structural problem such as a failure of the building or foundation. And for good reason, this hole can deteriorate the strength of a roof or wall.
It is essential to beware of cracks in walls.
The cover of a cracked wall should precede the assessment of the dangerousness of the hole. To hide it is not enough because remedying without analyzing the underlying reasons is a ticking time bomb. And for good reason, even the small visible cracks can be the result of a serious cause, even if repaired. When they exceed 0.2 millimeters, they can potentially turn into cracks. In this case, you will need to anticipate by asking for advice and troubleshooting a construction professional. And for good reason, these large cracks can cause support to collapse. Sometimes it is the mold that damages them. Fortunately, it is possible to get rid of it using different techniques.
continued on next page