How are cracks evaluated in the ceilings and walls?
When a specialist intervenes, he begins by analyzing the gravity of the cracks in the ceiling or wall. You will use tools as a gypsum support to measure the depth of the hole. You can also analyze the latter with a graduated crack meter to measure the width of this slot. The construction professional can also use a sample cup for the same purpose. It is thanks to these devices that the expert will be able to know if a repair will be necessary.
Filling the cracks – Source: Homedit
How to fill a plaster wall?
Typically the walls made with this material are located inside the house. The cracks that can damage them are generally shallow. Fortunately, cracks can be stopped with your knowledge of DIY and the right tools. To do this, you will need a brush, a scraper, a spatula, sandpaper and a putty cartridge. The first step is to widen the hole with the scraper. . . Then use the brush to clean the plaster residue and sand the sides with the inside of the slot. It’s time to use the putty to fill it and wait for it to dry. Use the sandpaper to smooth the wall or ceiling. For a more aesthetic appearance, you will need to repaint it with white or the color you prefer. Magical, isn’t it?
My wall is made of concrete: how can I repair it?
This more fragile wall material requires more extensive repair work. If the crack is shallow and shallow, you can plug the hole in the wall by equipping you with the tools that are indispensable for this action. The putty, which is easily found in DIY shops, allows you to fill the space and make it disappear if the width is not very wide. The shaving or finishing smooth the wall before painting or upholstering it. To make the process easier you can use a spatula. It is important to respect the drying times indicated on the package.
What forms of coverage are available?
There are several types of coatings available on the market to effectively seal a gap in a wall. When a wall starts to break, you can choose the powder or the paste. The first is suitable for larger cracks, while the second has the advantage of having a longer duration and being ready to use. Instead, it acts sporadically against superficial cracks. If you have a layer of powder, carefully read the package to find out how much water you should mix this DIY product with. Then you will have to pour it into an average container to mix it. The preparation must be smooth and homogeneous. The final touch is to work the spatula in this liquid and seal the slit. Remove the excess with the tool and all you have to do is let it dry. When your coating is ready for use, you will find it easier to repair any opening cracks. Whether vertical or horizontal, these holes should be filled with the coating that requires no prior preparation. Apply this clay-based product with a spatula and spread it on a surface that extends beyond the grooves. Make sure that the liquid fills the liquid by several times the tool. Once dry, you will have to sand to remove the residue and give the paste time to dry out. After these actions, the wall will be sealed again and the potential damage caused by the small crack will be eliminated!
continued on next page