ADVERTISEMENT
White vinegar is a product that is normally used in the kitchen. It can also be used to clean and disinfect some vegetables before preparing a salad. But did you know that it is also very useful for cleaning the bathroom?
Disinfecting the bathroom is very important for hygiene and safety issues, and white vinegar can be of great help in this regard. Thanks to its disinfectant properties, white vinegar is an excellent alternative to industrial cleaners that are loaded with toxic substances.
Below we suggest 6 ways to use white vinegar to clean the entire bathroom.
White vinegar and water to disinfect the toilet
For obvious reasons, bacteria and dirt accumulate on the surface of the cabinet and dirt and for this reason it should be cleaned often. One solution to whiten it and thoroughly disinfect it is the use of white vinegar.
To disinfect the toilet sprays 200 ml of white vinegar over the entire surface of the same, leave it to act for 15 and 20 minutes, then rub with a sponge and rinse.
Aceto for polishing mirrors
On the bathroom mirrors accumulate dust, toothpaste residues and much more. To keep it clean without too much effort, prepare the following solution.
Mix 120 ml of white vinegar with 125 ml of water and spray directly on the mirror. Use absorbent paper to remove excess solution. You'll see how the mirrors are going to be shiny again.
Aceto and bicarbonate to clean the shower
Bathtub and shower are inclined to the appearance of mold stains and soap residues. To eliminate them and get them back as new, use undiluted vinegar and mixed with a little baking soda.
Mix both ingredients and apply directly to stains, then use a sponge to rub well. Act for a few minutes, then rinse with plenty of water and dry with a clean cloth.
Continue Reading in next page
ADVERTISEMENT
