1. How to clean the slurry with sodium bicarbonate
Sodium bicarbonate is the perfect solution for eco-cleaning enthusiasts. It has ideal antiseptic properties for removing residues and bacteria on any surface.
Mix hot water with sodium bicarbonate until a creamy consistency is achieved. Use an old toothbrush to rub between the lines of grout. After about 20 minutes, wipe with a clean cloth or mop, as you usually do.
2. Use hydrogen peroxide to clean the grout
Hydrogen peroxide is not only used to disinfect wounds. Its ability to remove blood or wine stains is known, but did you know that it is also one of the best products for cleaning grouts?
You just need a little hydrogen peroxide and an old toothbrush to rub between the joints and remove all dirt. Finally, rinse with water and a clean cloth.
3. 3. White vinegar against dirt between the seals
Our grandmothers used vinegar to clean up about everything, and they were right. Vinegar is one of the most effective natural products for cleaning and disinfecting surfaces, eliminating the most stubborn dirt.
Mix two equal parts of vinegar and warm water and soak a cloth in the solution. Clean between the joints and, after a few minutes, wipe with a clean cloth. If the stains are old and do not remove, apply a little undiluted vinegar for a few minutes before cleaning.
4. In extreme cases, water and bleach
If the natural alternatives listed above do not give satisfactory results, there is only one way out: use bleach.
Wear gloves and pour 3 or 4 tablespoons of bleach for each litre of water. Use the solution to rub between the joints with a used toothbrush and, after about 10 minutes, wipe with a clean cloth.
Keeping the soil impeccably clean and removing dirt between the joints is simpler than one might think: immediately apply the tricks described above to restore the original appearance to the ground.