Very white joints in a single pass: the method that “dissolves” dirt and prevails

2. Use hydrogen peroxide to clean the grout

Hydrogen peroxide is not only used to disinfect wounds. It is known for its ability to remove blood or wine spots, but did you know that it is also one of the best slurry cleaners?

All you need is hydrogen peroxide and an old toothbrush to rub between the joints and remove all the dirt. Finally, rinse with water and a clean cloth.

3. 3. White vinegar against dirt between joints

Our grandmothers used vinegar to clean almost everything, and they were right. Vinegar is one of the most effective natural products for cleaning and disinfecting surfaces, eliminating the most stubborn dirt.

Mix two equal parts of vinegar and warm water and soak a cloth in the solution. Wipe between the joints, and after a few minutes, wipe with a clean cloth. If the stains are old and do not detach, apply a little undiluted vinegar for a few minutes before cleaning.

4. In extreme cases, water and bleach

If the natural alternatives listed above do not give satisfactory results, there is only one way out: to turn to bleach.

Wear gloves and pour 3 or 4 tablespoons of bleach per gallon of water. Use the solution to rub between the joints with a used toothbrush and, after about 10 minutes, wipe with a clean cloth.

Keeping the ground impeccable and removing dirt between the joints is easier than you think: apply the tricks described above immediately to restore the original appearance to the ground.