ADVERTISEMENT
Tools Needed
Before you begin, make sure you have the following tools on hand:
- Flat screwdriver
- Steel Grippers
- Friction tape
- Magnifier or magnifying lens
Procedure
Step 1:
The first thing you need to do is identify the problem. Connect the lamp to a power source and check for any signs of life, such as flickering or dim light. Look at the LEDs and look for black dots in the center, indicating that they are burnt out.
Step 2:
Disconnect the lamp and open the housing with the flathead screwdriver. Be careful not to damage any components. Once, visually inspect LEDs and circuitry for visible damage.
Step 3:
Connect the lamp back to power (taking all precautions necessary to avoid electric shock). Use the steel tweezers to gently touch each LED. If touching an LED lights up or change behavior, it is probably defective.
Step 4:
To repair the faulty LED, use the flathead screwdriver to slightly wear down the surface of the LED. Sometimes, this can reset the internal connection of the LED and make it work again. Do it carefully and patiently.
Step 5:
Once you've repaired the LED, disconnect the lamp from power. Use the electrical tape to any secure loose connections and to insulate areas you've worked on, ensuring there are no short circuits.
Step 6:
Reassemble the lamp. Make sure all components are securely connected and the case is secure.
Step 7:
Connect the lamp to power and check if it is properly working. If everything is in order, you will have successfully repaired your LED lamp.
Repairing an LED lamp may seem intimidating at first, but with the right tools and a little patience, it's a perfectly manageable task.
Not only will you save the money buying a new lamp, but you'll also gain a useful skill that you can apply in future repairs.
So the next time your LED lamp fails, remember that it doesn't need to be discarded; Just follow these steps and give it a new lease of life.
ADVERTISEMENT
