ADVERTISEMENT
Ingredients:
Boiler (properly installed and maintained)
Radiators
Properly calibrated thermostat
Working pumps and valves
Clean pipes and vents
Correct pressure settings
Knowledge of past maintenance or repairs
Clear communication between homeowner and plumber
Instructions:
Check the Boiler Pressure: The boiler pressure should be set according to the manufacturer's recommendation. If the pressure is too high or low, it can prevent hot water from circulating properly, leading to lukewarm radiators.
Inspect the Thermostat and Timer Settings: Make sure that the thermostat is set correctly. If it's malfunctioning or was set incorrectly five years ago, this could be the root cause of the issue.
Bleed the Radiators: Air trapped in the radiators can prevent them from heating properly. Bleed the radiators to release the air and ensure proper heat flow.
Examine the Pump and Valves: Check the pump for any signs of failure, as well as the valves leading to the radiators. These should open and close properly, allowing the hot water to circulate throughout the system.
Look for Any Blockages or Corrosion in the Pipes: Over time, sludge or scale can build up in the pipes, affecting heat distribution. Have a professional flush the system if necessary.
Assess the Overall System: Ensure that the entire system is in good condition, including all pipework and components. Any sign of wear or corrosion can be a clue to the underlying problem.
continued on next page
ADVERTISEMENT
